G.1.2 Complex Elementary Functions

Static Semantics

The generic library package Numerics.Generic_Complex_Elementary_Functions has the following declaration:

with Ada.Numerics.Generic_Complex_Types; generic with package Complex_Types is new Ada.Numerics.Generic_Complex_Types (<>); use Complex_Types; package Ada.Numerics.Generic_Complex_Elementary_Functions is pragma Pure(Generic_Complex_Elementary_Functions);

function Sqrt (X : Complex) return Complex; function Log (X : Complex) return Complex; function Exp (X : Complex) return Complex; function Exp (X : Imaginary) return Complex; function "**" (Left : Complex; Right : Complex) return Complex; function "**" (Left : Complex; Right : Real'Base) return Complex; function "**" (Left : Real'Base; Right : Complex) return Complex;

function Sin (X : Complex) return Complex; function Cos (X : Complex) return Complex; function Tan (X : Complex) return Complex; function Cot (X : Complex) return Complex;

function Arcsin (X : Complex) return Complex; function Arccos (X : Complex) return Complex; function Arctan (X : Complex) return Complex; function Arccot (X : Complex) return Complex;

function Sinh (X : Complex) return Complex; function Cosh (X : Complex) return Complex; function Tanh (X : Complex) return Complex; function Coth (X : Complex) return Complex;

function Arcsinh (X : Complex) return Complex; function Arccosh (X : Complex) return Complex; function Arctanh (X : Complex) return Complex; function Arccoth (X : Complex) return Complex;

end Ada.Numerics.Generic_Complex_Elementary_Functions;

9/1

{8652/0020} {Ada.Numerics.Complex_Elementary_Functions} The library package Numerics.Complex_Elementary_Functions is declared pure and defines the same subprograms as Numerics.Generic_Complex_Elementary_Functions, except that the predefined type Float is systematically substituted for Real'Base, and the Complex and Imaginary types exported by Numerics.Complex_Types are systematically substituted for Complex and Imaginary, throughout. Nongeneric equivalents of Numerics.Generic_Complex_Elementary_Functions corresponding to each of the other predefined floating point types are defined similarly, with the names Numerics.Short_Complex_Elementary_Functions, Numerics.Long_Complex_Elementary_Functions, etc.

9.a

Reason: The nongeneric equivalents are provided to allow the programmer to construct simple mathematical applications without being required to understand and use generics.

The overloading of the Exp function for the pure-imaginary type is provided to give the user an alternate way to compose a complex value from a given modulus and argument. In addition to Compose_From_Polar(Rho, Theta) (see G.1.1), the programmer may write Rho * Exp(i * Theta).

The imaginary (resp., real) component of the parameter X of the forward hyperbolic (resp., trigonometric) functions and of the Exp function (and the parameter X, itself, in the case of the overloading of the Exp function for the pure-imaginary type) represents an angle measured in radians, as does the imaginary (resp., real) component of the result of the Log and inverse hyperbolic (resp., trigonometric) functions.

The functions have their usual mathematical meanings. However, the arbitrariness inherent in the placement of branch cuts, across which some of the complex elementary functions exhibit discontinuities, is eliminated by the following conventions:

The imaginary component of the result of the Sqrt and Log functions is discontinuous as the parameter X crosses the negative real axis.

The result of the exponentiation operator when the left operand is of complex type is discontinuous as that operand crosses the negative real axis.

The real (resp., imaginary) component of the result of the Arcsin and Arccos (resp., Arctanh) functions is discontinuous as the parameter X crosses the real axis to the left of -1.0 or the right of 1.0.

The real (resp., imaginary) component of the result of the Arctan (resp., Arcsinh) function is discontinuous as the parameter X crosses the imaginary axis below -i or above i.

The real component of the result of the Arccot function is discontinuous as the parameter X crosses the imaginary axis between -i and i.

The imaginary component of the Arccosh function is discontinuous as the parameter X crosses the real axis to the left of 1.0.

The imaginary component of the result of the Arccoth function is discontinuous as the parameter X crosses the real axis between -1.0 and 1.0.

The computed results of the mathematically multivalued functions are rendered single-valued by the following conventions, which are meant to imply the principal branch:

The real component of the result of the Sqrt and Arccosh functions is nonnegative.

The same convention applies to the imaginary component of the result of the Log function as applies to the result of the natural-cycle version of the Argument function of Numerics.Generic_Complex_Types (see G.1.1).

The range of the real (resp., imaginary) component of the result of the Arcsin and Arctan (resp., Arcsinh and Arctanh) functions is approximately -PI/2.0 to PI/2.0.

The real (resp., imaginary) component of the result of the Arccos and Arccot (resp., Arccoth) functions ranges from 0.0 to approximately PI.

The range of the imaginary component of the result of the Arccosh function is approximately -PI to PI.

In addition, the exponentiation operator inherits the single-valuedness of the Log function.

Dynamic Semantics

The exception Numerics.Argument_Error is raised by the exponentiation operator, signaling a parameter value outside the domain of the corresponding mathematical function, when the value of the left operand is zero and the real component of the exponent (or the exponent itself, when it is of real type) is zero.

{Division_Check [partial]} {check, language-defined (Division_Check)} {Constraint_Error (raised by failure of run-time check)} The exception Constraint_Error is raised, signaling a pole of the mathematical function (analogous to dividing by zero), in the following cases, provided that Complex_Types.Real'Machine_Overflows is True:

by the Log, Cot, and Coth functions, when the value of the parameter X is zero;

by the exponentiation operator, when the value of the left operand is zero and the real component of the exponent (or the exponent itself, when it is of real type) is negative;

by the Arctan and Arccot functions, when the value of the parameter X is ± i;

by the Arctanh and Arccoth functions, when the value of the parameter X is ± 1.0.

[Constraint_Error can also be raised when a finite result overflows (see G.2.6); this may occur for parameter values sufficiently near poles, and, in the case of some of the functions, for parameter values having components of sufficiently large magnitude.] {unspecified [partial]} When Complex_Types.Real'Machine_Overflows is False, the result at poles is unspecified.

33.a

Reason: The purpose of raising Constraint_Error (rather than Numerics.Argument_Error) at the poles of a function, when Float_Type'Machine_Overflows is True, is to provide continuous behavior as the actual parameters of the function approach the pole and finally reach it.

33.b

Discussion: It is anticipated that an Ada binding to IEC 559:1989 will be developed in the future. As part of such a binding, the Machine_Overflows attribute of a conformant floating point type will be specified to yield False, which will permit implementations of the complex elementary functions to deliver results with an infinite component (and set the overflow flag defined by the binding) instead of raising Constraint_Error in overflow situations, when traps are disabled. Similarly, it is appropriate for the complex elementary functions to deliver results with an infinite component (and set the zero-divide flag defined by the binding) instead of raising Constraint_Error at poles, when traps are disabled. Finally, such a binding should also specify the behavior of the complex elementary functions, when sensible, given parameters with infinite components.

Implementation Requirements

In the implementation of Numerics.Generic_Complex_Elementary_Functions, the range of intermediate values allowed during the calculation of a final result shall not be affected by any range constraint of the subtype Complex_Types.Real.

34.a

Implementation Note: Implementations of Numerics.Generic_Complex_Elementary_Functions written in Ada should therefore avoid declaring local variables of subtype Complex_Types.Real; the subtype Complex_Types.Real'Base should be used instead.

{prescribed result (for the evaluation of a complex elementary function)} In the following cases, evaluation of a complex elementary function shall yield the prescribed result (or a result having the prescribed component), provided that the preceding rules do not call for an exception to be raised:

When the parameter X has the value zero, the Sqrt, Sin, Arcsin, Tan, Arctan, Sinh, Arcsinh, Tanh, and Arctanh functions yield a result of zero; the Exp, Cos, and Cosh functions yield a result of one; the Arccos and Arccot functions yield a real result; and the Arccoth function yields an imaginary result.

When the parameter X has the value one, the Sqrt function yields a result of one; the Log, Arccos, and Arccosh functions yield a result of zero; and the Arcsin function yields a real result.

When the parameter X has the value -1.0, the Sqrt function yields the result

i (resp., -i), when the sign of the imaginary component of X is positive (resp., negative), if Complex_Types.Real'Signed_Zeros is True;

i, if Complex_Types.Real'Signed_Zeros is False;

the Log function yields an imaginary result; and the Arcsin and Arccos functions yield a real result.

When the parameter X has the value ± i, the Log function yields an imaginary result.

Exponentiation by a zero exponent yields the value one. Exponentiation by a unit exponent yields the value of the left operand (as a complex value). Exponentiation of the value one yields the value one. Exponentiation of the value zero yields the value zero.

43.a

Discussion: It is possible to give many other prescribed results restricting the result to the real or imaginary axis when the parameter X is appropriately restricted to easily testable portions of the domain. We follow the proposed ISO/IEC standard for Generic_Complex_Elementary_Functions (for Ada 83), CD 13813, in not doing so, however.

Other accuracy requirements for the complex elementary functions, which apply only in the strict mode, are given in G.2.6.

The sign of a zero result or zero result component yielded by a complex elementary function is implementation defined when Complex_Types.Real'Signed_Zeros is True.

45.a

Implementation defined: The sign of a zero result (or a component thereof) from any operator or function in Numerics.Generic_Complex_Elementary_Functions, when Complex_Types.Real'Signed_Zeros is True.

Implementation Permissions

The nongeneric equivalent packages may, but need not, be actual instantiations of the generic package with the appropriate predefined nongeneric equivalent of Numerics.Generic_Complex_Types; if they are, then the latter shall have been obtained by actual instantiation of Numerics.Generic_Complex_Types.

The exponentiation operator may be implemented in terms of the Exp and Log functions. Because this implementation yields poor accuracy in some parts of the domain, no accuracy requirement is imposed on complex exponentiation.

{unspecified [partial]} The implementation of the Exp function of a complex parameter X is allowed to raise the exception Constraint_Error, signaling overflow, when the real component of X exceeds an unspecified threshold that is approximately log(Complex_Types.Real'Safe_Last). This permission recognizes the impracticality of avoiding overflow in the marginal case that the exponential of the real component of X exceeds the safe range of Complex_Types.Real but both components of the final result do not. Similarly, the Sin and Cos (resp., Sinh and Cosh) functions are allowed to raise the exception Constraint_Error, signaling overflow, when the absolute value of the imaginary (resp., real) component of the parameter X exceeds an unspecified threshold that is approximately log(Complex_Types.Real'Safe_Last) + log(2.0). {unspecified [partial]} This permission recognizes the impracticality of avoiding overflow in the marginal case that the hyperbolic sine or cosine of the imaginary (resp., real) component of X exceeds the safe range of Complex_Types.Real but both components of the final result do not.

Implementation Advice

Implementations in which Complex_Types.Real'Signed_Zeros is True should attempt to provide a rational treatment of the signs of zero results and result components. For example, many of the complex elementary functions have components that are odd functions of one of the parameter components; in these cases, the result component should have the sign of the parameter component at the origin. Other complex elementary functions have zero components whose sign is opposite that of a parameter component at the origin, or is always positive or always negative.

Wording Changes from Ada 83

49.a

The semantics of Numerics.Generic_Complex_Elementary_Functions differs from Generic_Complex_Elementary_Functions as defined in ISO/IEC CD 13814 (for Ada 83) in the following ways:

49.b

The generic package is a child unit of the package defining the Argument_Error exception.

49.c

The proposed Generic_Complex_Elementary_Functions standard (for Ada 83) specified names for the nongeneric equivalents, if provided. Here, those nongeneric equivalents are required.

49.d

The generic package imports an instance of Numerics.Generic_Complex_Types rather than a long list of individual types and operations exported by such an instance.

49.e

The dependence of the imaginary component of the Sqrt and Log functions on the sign of a zero parameter component is tied to the value of Complex_Types.Real'Signed_Zeros.

49.f

Conformance to accuracy requirements is conditional.

Contents Index Search Previous Next Legal