ACATS 3.0 User's Guide
D.2.7 Sequential Files (Non-supported Features)
If Use_Error
or Name_Error is raised by every attempt to create or open a
sequential file (this is appropriate behavior for an implementation which
does not support sequential files), then the tests contained in the following
files should report NOT_APPLICABLE:
| CE2102A.ADA | CE2106A.ADA | CE2201D.DEP | CE2204A.ADA |
|
| CE2102C.TST | CE2108E.ADA | CE2201E.DEP | CE2204B.ADA |
|
| CE2102G.ADA | CE2108F.ADA | CE2201F.ADA | CE2204C.ADA |
|
| CE2102N.ADA | CE2109A.ADA | CE2201G.ADA | CE2204D.ADA |
|
| CE2102O.ADA | CE2110A.ADA | CE2201H.ADA | CE2205A.ADA |
|
| CE2102P.ADA | CE2111A.ADA | CE2201I.ADA | CE2206A.ADA |
|
| CE2102Q.ADA | CE2111C.ADA | CE2201J.ADA | CE2208B.ADA |
|
| CE2102X.ADA | CE2111F.ADA | CE2201K.ADA | CXA8001.A |
|
| CE2103A.TST | CE2111I.ADA | CE2201L.ADA | CXA8002.A |
|
| CE2103C.ADA | CE2201A.ADA | CE2201M.ADA | |
|
| CE2104A.ADA | CE2201B.ADA | CE2201N.ADA | |
|
| CE2104B.ADA | CE2201C.ADA | CE2203A.TST | |
|
If Use_Error
or Name_Error is raised by every attempt to create or open a
sequential file with mode In_File, then the tests contained
in the following files should report NOT_APPLICABLE:
| CE2102G.ADA | CE2111C.ADA | CE2201G.ADA | CE2201M.ADA |
|
| CE2102O.ADA | CE2111F.ADA | CE2201H.ADA | CE2201N.ADA |
|
| CE2104A.ADA | CE2201A.ADA | CE2201I.ADA | CE2204A.ADA |
|
| CE2104B.ADA | CE2201B.ADA | CE2201J.ADA | CE2205A.ADA |
|
| CE2108F.ADA | CE2201C.ADA | CE2201K.ADA | CE2206A.ADA |
|
| CE2111A.ADA | CE2201F.ADA | CE2201L.ADA | CE2208B.ADA |
|
If Use_Error
or Name_Error is raised by every attempt to create or open a
sequential file with mode Out_File, then the tests contained
in the following files should report NOT_APPLICABLE:
| CE2102A.ADA | CE2104B.ADA | CE2201B.ADA | CE2201M.ADA |
|
| CE2102C.TST | CE2106A.ADA | CE2201C.ADA | CE2201N.ADA |
|
| CE2102G.ADA | CE2108E.ADA | CE2201D.DEP | CE2203A.TST |
|
| CE2102N.ADA | CE2108F.ADA | CE2201E.DEP | CE2204A.ADA |
|
| CE2102O.ADA | CE2109A.ADA | CE2201F.ADA | CE2204B.ADA |
|
| CE2102P.ADA | CE2110A.ADA | CE2201G.ADA | CE2204C.ADA |
|
| CE2102Q.ADA | CE2111A.ADA | CE2201H.ADA | CE2204D.ADA |
|
| CE2102X.ADA | CE2111C.ADA | CE2201I.ADA | CE2205A.ADA |
|
| CE2103A.TST | CE2111F.ADA | CE2201J.ADA | CE2206A.ADA |
|
| CE2103C.ADA | CE2111I.ADA | CE2201K.ADA | CE2208B.ADA |
|
| CE2104A.ADA | CE2201A.ADA | CE2201L.ADA | CXA8001.A |
|
If Use_Error
or Name_Error is raised by every attempt to create or open a
sequential file with mode APPEND_FILE, then the tests contained in the
following files should report NOT_APPLICABLE:
If reset to mode
Out_File is not supported for sequential files, then the tests
contained in the following files should report NOT_APPLICABLE:
| CE2111C.ADA | CE2111F.ADA | CE2111I.ADA | |
|
If reset to mode
In_File is not supported for sequential files, then the tests
contained in the following files should report NOT_APPLICABLE:
| CE2111F.ADA | CE2111I.ADA | CE2204C.ADA | |
|
If Delete
for sequential files is not supported, then the tests contained in the
following files should report NOT_APPLICABLE:
If the implementation
cannot restrict the file capacity for a sequential file, then the test
contained in the following file should report NOT_APPLICABLE:
