3.10.2 Operations of Access Types

It should be possible for an access value to designate an object declared by an object declaration, or a subcomponent thereof. In implementation terms, this means pointing at stack-allocated and statically allocated data structures. However, dangling references should be prevented, primarily via compile-time rules, so long as features like Unchecked_Access and Unchecked_Deallocation are not used.

In order to create such access values, we require that the access type be a general access type, that the designated object be aliased, and that the accessibility rules be obeyed. 

Discussion: Saying that the expected type shall be a "single access type" is our "new" way of saying that the type has to be determinable from context using only the fact that it is an access type. See 4.2 and 8.6. Specifying the expected profile only implies type conformance. The more stringent subtype conformance is required by a Legality Rule. This is the only Resolution Rule that applies to the name in a prefix of an attribute_reference. In all other cases, the name has to be resolved without using context. See 4.1.4.

{AI95-00235-01} Saying “single access type” is a bit of a fudge. Both the context and the prefix may provide both multiple types; “single” only means that a single, specific interpretation must remain after resolution. We say “single” here to trigger the Legality Rules of 8.6. The resolution of an access attribute is similar to that of an assignment_statement. For example: 

Discussion: {AI05-0005-1} The Unchecked_Access attribute acts as if the object was declared at library-level; this applies even when it is used as the value of anonymous access type. See 13.10.

Reason: {AI95-00416-01} This rule defines the “normal” accessibility of entities. In the absence of special rules below, we intend for this rule to apply. 

Discussion: {AI95-00416-01} This rule defines the accessibility of all named access types, as well as the accessibility level of all anonymous access types other than those for access parameters and access discriminants. Special rules exist for the accessibility level of such anonymous types. Components, stand-alone objects, and function results whose (anonymous) type is defined by an access_definition have accessibility levels corresponding to named access types defined at the same point. 

Ramification: {AI95-00230-01} Because accessibility level is determined by where the access_definition is elaborated, for a type extension, the anonymous access types of components (other than access discriminants) inherited from the parent have the same accessibility as they did in the parent; those in the extension part have the accessibility determined by the scope where the type extension is declared. Similarly, the types of the non-discriminant access components of a derived untagged type have the same accessibility as they did in the parent. 

To be honest: {AI05-0235-1} We use "invocation of" in the parameter case as a master is formally an execution of something. But we mean this to be interpreted statically (for instance, as the body of the subprogram) for the purposes of computing "statically deeper than" (see below). 

Ramification: {AI05-0235-1} Note that accessibility can differ depending on the view of an object (for both static and dynamic accessibility). For instance, the accessibility level of a formal parameter may be different than the accessibility level of the corresponding actual parameter. This occurs in other cases as well. 

Reason: {AI05-0235-1} We define the (dynamic) accessibility of formal parameters in order that it does not depend on the parameter passing model (by-reference or by-copy) as that is implementation defined. Otherwise, there would be a portability issue. 

To be honest: {AI95-00416-01} The first sentence is talking about a static use of the entire return object — a slice that happens to be the entire return object doesn't count. On the other hand, this is intended to allow parentheses and qualified_expressions.

Ramification: {AI95-00416-01} {AI05-0234-1} If the function is used as a prefix, this bullet does not apply the second sentence applies. Similarly, an assignment_statement is not an initialization of an object, so this bullet does not apply the second sentence applies. 

Ramification: {AI95-00318-02} {AI95-00416-01} The “innermost master which evaluated the function call” does not include the function call itself (which might be a master).

{AI95-00318-02} {AI95-00416-01} We really mean the innermost master here, which could be a very short lifetime. Consider a function call used as a parameter of a procedure call. In this case the innermost master which evaluated the function call is the procedure call. 

Ramification: {AI05-0234-1} These rules do not mention whether the result object is built-in-place (see 7.6). In particular, in the case where building in place is optional, the choice whether or not to build-in-place has no effect on masters, lifetimes, or accessibility.

Implementation Note: {AI05-0234-1} There are several cases where the implementation may have to pass in the accessibility level of the result object on a call, to support later rules where the accessibility level comes from the master of the call:

In particular, this implies passing a level parameter when the result type is class-wide, since descendants may add access discriminants. For most implementations this will mean that functions with controlling results will also need a level parameter.

Reason: We define the accessibility level of the return object during the return statement to be that of the return statement itself so that the object may be designated by objects local to the return statement, but not by objects outside the return statement. In addition, the intent is that the return object gets finalized if the return statement ends without actually returning (for example, due to propagating an exception, or a goto). For a normal return, of course, no finalization is done before returning. 

Discussion: This deals with the following cases, when they occur in the context of an allocator or return statement: 

Ramification: {AI05-0005-1} If the value for this rule and the next one is derived from an Unchecked_Access attribute, the accessibility is library-level no matter what the accessibility level of the object is (see 13.10).

Discussion: This covers the case of a unconstrained subcomponent of a limited type with defaulted access discriminants. 

Discussion: In this bullet, the aggregate has to occur in the context of an allocator or return statement, while the subtype_indication of the previous bullet can occur anywhere (it doesn't have to be directly given in the allocator or return statement). 

Discussion: {AI95-00416-01} In other words, if you know the value of the discriminant for an allocator or return statement from a discriminant constraint or an aggregate component association, then that determines the accessibility level; if you don't know it, then it is based on the object itself. 

Ramification: {AI05-0005-1} If the value of the actual is derived from an Unchecked_Access attribute, the accessibility is always library-level (see 13.10).

Reason: These represent “downward closures” and thus require passing of static links or global display information (along with generic sharing information if the implementation does sharing) along with the address of the subprogram. We must prevent conversions of these to types with “normal” accessibility, as those typically don't include the extra information needed to make a call. 

Ramification: The rules of access discriminants are such that when the space for an object with a coextension is reclaimed, the space for the coextensions can be reclaimed. Hence, there is implementation advice (see 13.11) that an object and its coextensions all be allocated from the same storage pool (or stack frame, in the case of a declared object). 

Discussion: {AI05-0014-1} This rule applies even when no dereference exists, for example when an access value is passed as an access parameter. This rule ensures that implementations are not required to include dynamic accessibility values with access values. 

To be honest: Strictly speaking, this should talk about the constructs (such as subprogram_bodies) being statically nested within one another; the masters are really the executions of those constructs. 

To be honest: If a given accessibility level is statically deeper than another, then each level defined to be the same as the given level is statically deeper than each level defined to be the same as the other level. 

Ramification: This rule means that it is illegal to convert an access parameter specifying an access to subprogram to a named access to subprogram type, but it is allowed to pass such an access parameter to another access parameter (the implicit conversion's accessibility will succeed). 

Ramification: In these cases, we use dynamic accessibility checks. 

To be honest: {AI05-0235-1} This rule has no effect if the previous bullet also applies (that is, the “a level” is of an explicitly aliased parameter). 

Proof: {AI05-0082-1} A generic package does not introduce a new master, so it has the static level of its declaration; the rest follows from the other “statically deeper” rules. 

Ramification: In other words, the rules are checked at compile time of the type_declaration, in an assume-the-worst manner. 

Ramification: Library_unit_declarations are library level. Nested declarations are library level if they are nested only within packages (possibly more than one), and not within subprograms, tasks, etc. 

To be honest: The definition of the accessibility level of the anonymous type of an access parameter specifying an access-to-object type cheats a bit, since it refers to the view designated by the actual, but access values designate objects, not views of objects. What we really mean is the view that “would be” denoted by an expression “X.all”, where X is the actual, even though such an expression is a figment of our imagination. The definition is intended to be equivalent to the following more verbose version: The accessibility level of the anonymous type of an access parameter is as follows: 

Note that the allocator case is explicitly mentioned in the RM95, because otherwise the definition would be circular: the level of the anonymous type is that of the view designated by the actual, which is that of the access type. 

Discussion: A deeper accessibility level implies a shorter maximum lifetime. Hence, when a rule requires X to have a level that is “not deeper than” Y's level, this requires that X has a lifetime at least as long as Y. (We say “maximum lifetime” here, because the accessibility level really represents an upper bound on the lifetime; an object created by an allocator can have its lifetime prematurely ended by an instance of Unchecked_Deallocation.)

Package elaborations are not masters, and are therefore invisible to the accessibility rules: an object declared immediately within a package has the same accessibility level as an object declared immediately within the declarative region containing the package. This is true even in the body of a package; it jibes with the fact that objects declared in a package_body live as long as objects declared outside the package, even though the body objects are not visible outside the package.

Note that the level of the view denoted by X.all can be different from the level of the object denoted by X.all. The former is determined by the type of X; the latter is determined either by the type of the allocator, or by the master in which the object was declared. The former is used in several Legality Rules and run-time checks; the latter is used to define when X.all gets finalized. The level of a view reflects what we can conservatively “know” about the object of that view; for example, due to type_conversions, an access value might designate an object that was allocated by an allocator for a different access type.

Similarly, the level of the view denoted by X.all.Comp can be different from the level of the object denoted by X.all.Comp.

If Y is statically deeper than X, this implies that Y will be (dynamically) deeper than X in all possible executions.

Most accessibility checking is done at compile time; the rules are stated in terms of “statically deeper than”. The exceptions are: 

{AI05-0005-1} Note that run-time checks are not required for access discriminants (except during function returns and allocators), because their accessibility is determined statically by the accessibility level of the enclosing object.

This The accessibility level of the result object of a function reflects the time when that object will be finalized; we don't allow pointers to the object to survive beyond that time.

We sometimes use the terms “accessible” and “inaccessible” to mean that something has an accessibility level that is not deeper, or deeper, respectively, than something else.

Implementation Note: {AI95-00318-02} {AI95-00344-01} {AI95-00416-01} If an accessibility Legality Rule is satisfied, then the corresponding run-time check (if any) cannot fail (and a reasonable implementation will not generate any checking code) unless one of the cases requiring run-time checks mentioned previously is access parameters or shared generic bodies are involved.

Accessibility levels are defined in terms of the relations “the same as” and “deeper than”. To make the discussion more concrete, we can assign actual numbers to each level. Here, we assume that library-level accessibility is level 0, and each level defined as “deeper than” is one level deeper. Thus, a subprogram directly called from the environment task (such as the main subprogram) would be at level 1, and so on.

Accessibility is not enforced at compile time for access parameters of an access-to-object type. The “obvious” implementation of the run-time checks would be inefficient, and would involve distributed overhead; therefore, an efficient method is given below. The “obvious” implementation would be to pass the level of the caller at each subprogram call, task creation, etc. This level would be incremented by 1 for each dynamically nested master. An Accessibility_Check would be implemented as a simple comparison — checking that X is not deeper than Y would involve checking that X <= Y.

A more efficient method is based on passing static nesting levels (within constructs that correspond at run time to masters — packages don't count). Whenever an access parameter is passed, an implicit extra parameter is passed with it. The extra parameter represents (in an indirect way) the accessibility level of the anonymous access type, and, therefore, the level of the view denoted by a dereference of the access parameter. This is analogous to the implicit “Constrained” bit associated with certain formal parameters of an unconstrained but definite composite subtype. In this method, we avoid distributed overhead: it is not necessary to pass any extra information to subprograms that have no access parameters. For anything other than an access parameter and its anonymous type, the static nesting level is known at compile time, and is defined analogously to the RM95 definition of accessibility level (e.g. derived access types get their nesting level from their parent). Checking “not deeper than” is a "<=" test on the levels.

For each access parameter of an access-to-object type, the static depth passed depends on the actual, as follows: 

For the Accessibility_Check associated with a type_conversion of an access parameter of an access-to-object type of a given subprogram to a named access type, if the target type is statically nested within the subprogram, do nothing; the check can't fail in this case. Otherwise, check that the value passed in is <= the static nesting depth of the target type. The other Accessibility_Checks are handled in a similar manner.

This method, using statically known values most of the time, is efficient, and, more importantly, avoids distributed overhead.

{AI05-0148-1} The implementation of accessibility checks for stand-alone objects of anonymous access-to-object types can be similar to that for anonymous access-to-object parameters. A static level suffices; it can be calculated using rules similar to those previously described for access parameters.

{AI05-0148-1} One important difference between the stand-alone access variables and access parameters is that one can assign a local access parameter to a more global stand-alone access variable. Similarly, one can assign a more global access parameter to a more local stand-alone access variable.

{AI05-0148-1} For these cases, it is important to note that the “correct” static accessibility level for an access parameter assigned to a stand-alone access object is the minimum of the passed in level and the static accessibility level of the stand-alone object itself. This is true since the static accessibility level passed in might be deeper than that of the stand-alone object, but the dynamic accessibility of the passed in object clearly must be shallower than the stand-alone object (whatever is passed in must live at least as long as the subprogram call). We do not need to keep a more local static level as accesses to objects statically deeper than the stand-alone object cannot be stored into the stand-alone object. 

Discussion: Examples of accessibility: 

{AI05-0005-1} The above illegal statements are illegal because the accessibility levels level of X and Y are statically deeper than the accessibility level of A0. In every possible execution of any program including this library unit, if P is called, the accessibility level of X will be (dynamically) deeper than that of A0. Note that the accessibility levels of X and Y are the same.

Here's an example involving access parameters of an access-to-object type: 

The run-time Accessibility_Check at (1) can never fail, and no code should be generated to check it. The check at (2) will fail when called from (3), but not when called from (4).

Within a type_declaration, the rules are checked in an assume-the-worst manner. For example: 

C1, C2, and C3 are all illegal, because one might declare an object of type Rec at a more deeply nested place than the declaration of the type. C4 is legal, but the accessibility level of the object will be passed to function G, and constraint checks within G will prevent it from doing any evil deeds.

Note that we cannot defer the checks on C1, C2, and C3 until compile-time of the object creation, because that would cause violation of the privacy of private parts. Furthermore, the problems might occur within a task or protected body, which the compiler can't see while compiling an object creation. 

Discussion: The current instance of a limited type is considered a variable. 

Discussion: This restriction is intended to be similar to the restriction on renaming discriminant-dependent subcomponents.

Reason: This prevents references to subcomponents that might disappear or move or change constraints after creating the reference. 

Implementation Note: There was some thought to making this restriction more stringent, roughly: "X shall not denote a subcomponent of a variable with discriminant-dependent subcomponents, if the nominal subtype of the variable is an unconstrained definite subtype." This was because in some implementations, it is not just the discriminant-dependent subcomponents that might move as the result of an assignment that changed the discriminants of the enclosing object. However, it was decided not to make this change because a reasonable implementation strategy was identified to avoid such problems, as follows: 

Note that for objects of a by-reference type, it is not an error for a programmer to take advantage of the fact that such objects are passed by reference. Therefore, the above approach is also necessary for discriminated record types with components of a by-reference type.

To make the above strategy work, it is important that a component of a derived type is defined to be discriminant-dependent if it is inherited and the parent subtype constraint is defined in terms of a discriminant of the derived type (see 3.7).

Implementation Note: This ensures that the dope for an aliased array object can always be stored contiguous with it, but need not be if its nominal subtype is constrained. 

Ramification: {8652/0010} {AI95-00127-01} An access attribute can be used as the controlling operand in a dispatching call; see 3.9.2.

{AI95-00363-01} This does not require that types have a partial view in order to allow an access attribute of an unconstrained discriminated object, only that any partial view that does exist is unconstrained.

Ramification: In an instance body, a run-time check applies.

{AI95-00230-01} If A is an anonymous access-to-object type of an access parameter access type, then the view can never have a deeper accessibility level than A. The same is true for an anonymous access-to-object type of an access discriminant, except when X'Access is used to initialize an access discriminant of an object created by an allocator. The latter case is illegal if the accessibility level of X is statically deeper than that of the access type of the allocator; a run-time check is needed in the case where the initial value comes from an access parameter. Other anonymous access-to-object types have "normal" accessibility checks. 

Ramification: The check is needed for access parameters  of an access-to-object type and in instance bodies.

{AI05-0024-1} Because there are no access parameters permitted for task entries, the accessibility levels are always comparable. We would have to switch to the terminology used in 4.8 and 6.5 based on inclusion within masters if we relax this restriction. That might introduce unacceptable distributed overhead. 

Implementation Note: {AI05-0148-1} This check requires that some indication of lifetime is passed as an implicit parameter along with access parameters of an access-to-object type. A similar indication is required for stand-alone objects of anonymous access-to-object types. No such requirement applies to other anonymous access types access discriminants, since the checks associated with them are all compile-time checks. 

Discussion: {AI95-00229-01} The part about generic bodies is worded in terms of the denoted subprogram, not the denoted view; this implies that renaming is invisible to this part of the rule. “Declared within the declarative region of the generic” is referring to child and nested generic units. This rule is partly to prevent contract model problems with respect to the accessibility rules, and partly to ease shared-generic-body implementations, in which a subprogram declared in an instance needs to have a different calling convention from other subprograms with the same profile.

Overload resolution ensures only that the profile is type conformant type-conformant. This rule specifies that subtype conformance is required (which also requires matching calling conventions). P cannot denote an entry because access-to-subprogram types never have the entry calling convention. P cannot denote an enumeration literal or an attribute function because these have intrinsic calling conventions. 

Discussion: This means that any Legality Rule requiring that the accessibility level of an expression (or that of the type of an expression) shall or shall not be statically deeper than some other level also applies, in the case where the expression has distributed accessibility, to each dependent_expression of the underlying conditional_expression.

Reason: {AI95-00230-01} Anonymous access types can use the universal access equality operators declared in Standard, while named access types cannot for compatibility reasons. By not having equality operators for anonymous access types, we eliminate the need to specify exactly where the predefined operators for anonymous access types would be defined, as well as the need for an implementer to insert an implicit declaration for "=", etc. at the appropriate place in their symbol table. Note that ":=", 'Access, and ".all" are defined, and ":=" is defined though useless since all instances are constant. The literal null is also defined for the purposes of overload resolution, but is disallowed by a Legality Rules of this subclause. 

Proof: See 3.9.2.

Ramification: If equality of access-to-subprogram values is important to the logic of a program, a reference to the Access attribute of a subprogram should be evaluated only once and stored in a global constant for subsequent use and equality comparison.

We no longer make things like 'Last and ".component" (basic) operations of an access type that need to be "declared" somewhere. Instead, implicit dereference in a prefix takes care of them all. This means that there should never be a case when X.all'Last is legal while X'Last is not. See AI83-00154.

{AI95-00363-01} Aliased variables are not necessarily constrained in Ada 2005 (see 3.6). Therefore, a subcomponent of an aliased variable may disappear or change shape, and taking 'Access of such a subcomponent thus is illegal, while the same operation would have been legal in Ada 95. Note that most allocated objects are still constrained by their initial value (see 4.8), and thus legality of 'Access didn't change for them. For example:

{AI95-00363-01} If a discriminated full type has a partial view (private type) that is constrained, we do not allow 'Access on objects to create a value of an object of an access-to-unconstrained type. Ada 95 allowed this attribute and various access subtypes, requiring that the heap object be constrained and thus making details of the implementation of the private type visible to the client of the private type. See 4.8 for more on this topic.

{AI95-00229-01} {AI95-00254-01} Amendment Correction: Taking 'Access of a subprogram declared in a generic unit in the body of that generic is no longer allowed. Such references can easily be used to create dangling pointers, as Legality Rules are not rechecked in instance bodies. At the same time, the rules were loosened a bit where that is harmless, and also to allow any routine to be passed to an access parameter of an access-to-subprogram type. The now illegal uses of 'Access can almost always be moved to the private part of the generic unit, where they are still legal (and rechecked upon instantiation for possibly dangling pointers).

{8652/0010} {AI95-00127-01} Corrigendum: Access attributes of objects of class-wide types can be used as the controlling parameter in a dispatching calls (see 3.9.2). This was an oversight in Ada 95.

{AI95-00235-01} Amendment Correction: The type of the prefix can now be used in resolving Access attributes. This allows more uses of the Access attribute to resolve. For example: 

This change is upward compatible; any expression that does not resolve by the new rules would have failed a Legality Rule. 

{AI95-00162-01} Adjusted the wording to reflect the fact that expressions and function calls are masters.

{AI95-00230-01} {AI95-00254-01} {AI95-00318-02} {AI95-00385-01} {AI95-00416-01} Defined the accessibility of the various new kinds and uses of anonymous access types. 

{AI05-0008-1} Correction: Simplified the description of when a discriminant-dependent component is allowed as the prefix of 'Access to when the object is known to be constrained. This fixes a confusion as to whether a subcomponent of an object that is not certain to be constrained can be used as a prefix of 'Access. The fix introduces an incompatibility, as the rule did not apply in Ada 95 if the prefix was a constant; but it now applies no matter what kind of object is involved. The incompatibility is not too bad, since most kinds of constants are known to be constrained.

{AI05-0041-1} Correction: Corrected the checks for the constrainedness of the prefix of the Access attribute so that assume-the-worst is used in generic bodies. This may make some programs illegal, but those programs were at risk having objects disappear while valid access values still pointed at them. 

{AI05-0082-1} Correction: Eliminated the static accessibility definition for generic formal types, as the actual can be more or less nested than the generic itself. This allows programs that were illegal for Ada 95 and for Ada 2005.

{AI05-0148-1} {AI05-0253-1} Eliminate the static accessibility definition for stand-alone objects of anonymous access-to-object types. This allows such objects to be used as temporaries without causing accessibility problems. 

{AI05-0014-1} Correction: Corrected the rules so that the accessibility of the object designated by an access object is that of the access type, even when no dereference is given. The accessibility was not specified in the past. This correction applies to both Ada 95 and Ada 2005.

{AI05-0024-1} Correction: Corrected accessibility rules for access discriminants so that no cases are omitted.

{AI05-0051-1} {AI05-0234-1} {AI05-0235-1} Correction: Corrected accessibility rules for anonymous access return types and access discriminants in return statements.

{AI05-0066-1} Correction: Changed coextension rules so that coextensions that belong to an anonymous object are transfered to the ultimate object.

{AI05-0142-4} {AI05-0188-1} {AI05-0235-1} Defined the accessibility of explicitly aliased parameters (see 6.1) and conditional_expressions (see 4.5.7).

{AI05-0234-1} Correction: Defined the term “master of the call” to simplify other wording, especially that for the accessibility checks associated with return statements and explicitly aliased parameters.